I will review your pcb design, fix drc and erc errors and prepare jlcpcb gerbers

Is your board failing DRC, using a doubtful stackup, or relying on parts that are out of stock? I review your design and bring it to a manufacturable state.

A RECENT EXAMPLE

On a 4-layer power distribution board I took the design from 263 DRC violations and 17 ERC errors to zero errors. I corrected a 4.67 mm stackup to the standard 1.6 mm, opened solder mask for planned rework, checked trace width and creepage against IPC-2221, replaced obsolete parts and prepared the Gerbers, BOM and placement file for JLCPCB.

WHAT I CHECK

- ERC and DRC errors, unconnected nets, clearance and annular ring issues

- Stackup, copper weight and solder mask settings

- Footprint and part availability (LCSC/JLCPCB stock)

- Trace width and creepage for high-current or high-voltage nets

- Reference designators and schematic-to-PCB sync

TOOLS

KiCad and EasyEDA exports. Send your project files and your target fab.

TO START

Message me with your files and what you need. I reply with the scope and a timeline.